Jackery Smart Transfer Switch

[{"question"=>"which portable power stations are compatible with the smart transfer switch?", "answer"=>"it is designed to connect with the jackery explorer 5000 plus and supports up to two units simultaneously."}, {"question"=>"what power requirements does the smart transfer switch need?", "answer"=>"it requires split-phase 240v input and supports both 120v 60hz and split-phase 240v 60hz output. it does not support three-phase power."}, {"question"=>"what appliances can the smart transfer switch power?", "answer"=>"it can power circuits up to 240v/30a and 7200w. up to 12 circuits at 120v or 6 circuits at 240v can be connected at once. both voltage types can be used simultaneously."}, {"question"=>"does the smart transfer switch support outdoor installation?", "answer"=>"no. it is not waterproof and must be installed indoors or in a protected area."}, {"question"=>"does it support grid-tie functionality?", "answer"=>"no, the smart transfer switch cannot feed power from a portable power station or solar into the electrical grid."}, {"question"=>"can rooftop solar panels be connected directly?", "answer"=>"no. rooftop solar cannot connect directly to the smart transfer switch but can charge the explorer 5000 plus, which then powers the smart transfer switch."}, {"question"=>"is the smart transfer switch compatible with homes that already have a solar system?", "answer"=>"yes, if the home solar system is ac-coupled through an inverter with a dedicated breaker. during outages, ac-coupled systems stop working unless grid power is present."}, {"question"=>"how many amps does each circuit breaker support?", "answer"=>"each breaker supports up to 30a."}, {"question"=>"why is the switching time slower during a power outage?", "answer"=>"the ups mode may not be enabled, or the power station may be charging. without ups mode, switching takes around 5 seconds."}, {"question"=>"how do i achieve a 20ms ups transfer?", "answer"=>"enable ups mode in the jackery app. if the power station is charging during an outage, transfer time will be around 1 second."}, {"question"=>"how can i reduce electricity costs using peak and off-peak rates?", "answer"=>"use the 'charging-discharging plan' in the jackery app to schedule charging during off-peak and discharging during peak-rate periods."}, {"question"=>"how do i use rooftop solar to power my home with the smart transfer switch?", "answer"=>"connect rooftop solar to the explorer 5000 plus, then set the mode to 'self-powered' in the jackery app. solar will charge the battery first and then power the home."}, {"question"=>"how do i extend backup time for critical loads?", "answer"=>"move non-critical circuits to the 'nice to have' group in the jackery app. these circuits shut off automatically when battery levels fall below your backup threshold."}, {"question"=>"why do some circuits remain off after the main power returns?", "answer"=>"for safety, circuits turned off during backup mode do not automatically turn back on. they must be manually reactivated."}]